SEM Coater Systems
The Element Pi triple thermal source desktop coater provides a very versatile thermal evaporation system for a vast range of source materials in various forms from wire, cord, pellets and powders, compatible with Boat/basket and coil source holders.
The desk thermal evaporator can be fitted with three independent heat resistance thermal evaporation sources. The good design of the evaporation source holder causes no contamination from source materials on each other. The length of the source holders can be adjusted in the range of 5cm~9cm.
Sample Stages The DTT can be equipped with different sample stage configurations depending on the user requirements. The sample stages are rotatable with adjustable height that can be changed easily. The rotary planetary sample stage is a good choice for uniform coating of porous specimens.
Three independent heat resistance thermal evaporation sources.
Evaporation source holder designed causes no contamination from source materials on each other.
The length of the source holders can be adjusted in the range of 50mm~90mm.
Co-Evaporation upgrade available
Evaporation sources
Boat
Basket
Coil/Wire
SEM Coater Systems
Multi-layer thermal coatings
Plasma Cleaning
Large format chamber
High vacuum turbomolecular pump
Pumping Speed | 90 l/s | 350 l/s |
Ultimate Pressure | 7 x10-6 Torr | 7 x10-7 Torr |
Two stage rotary vane backing pump, 4m3/h
Full range vacuum gauge
Evaporation source (boat/basket/coil) selection for multilayer thin film deposition
Co–evaporation to form alloy films (optional)
Quartz crystal monitoring system for real time thickness measurement (1 nm precision)
Manual or automatic Timed or Thickness deposition
Intuitive touch screen to control the coating process and rapid data input
User friendly software that can be updated via network
Equipped with electronic shutter
Equipped with rotary sample holder (optional)
2 inches, 500 °C substrate heater (optional)
Two-year warranty
Vac coat Products are covered worldwide by both public and product Liability Insurance in case any property damage or personal injury happens caused by the Vac Coat systems.
Metal & dielectric Films
Fabrication of thin film sensors
Optical components
Nano & Microelectronic
Solar Cells
Multi boats, baskets and coils installation
Records and plots coating parameters graphs
Transfers the curves and deposition process data by USB port to PC
Automatic control of the power of coating independent of pressure
High current electrical feedthrough
0-100 high current, protected against short circuit, DC power supply
Utilities: 220V-240V, 50/60 HZ, 16A
Dimensions: 60 Cm H × 65 Cm W × 50 Cm D
Shipping weight: ~ 60 kg
The DTT has the following options and accessories:
High current power supply for co-evaporation
Quartz crystal sensors
Spare glass chamber
Evaporation sources (boat/basket/coil)
2 inches, 500 °C substrate heater
Sample rotation
MFC
Sealing gaskets
The desk thermal evaporator is equipped with a 7” colored touch screen with full automatic control and data input that can be operated by even inexperienced users. The vacuum and deposition information can be observed as digital data or curves on the touchscreen. Information of the last 300 coatings can also be saved in the history page.
The DST1 can be equipped with different sample stage configurations depending on the user requirements. The standard sample stage is rotatable with adjustable height and angle and can be changed easily. The rotary planetary sample stage is a good choice for uniform coating of porous specimens (optional).
The vacuum chamber is a heat resistance, Cylindrical Pyrex with 300 mm OD and 200 mm H. The system is fitted with an internally mounted 90 L/s turbomolecular pump, backed by a two-stage rotary pump which introduces clean vacuum without oil contamination that is normally present with an ordinary diffusion pump.
SEM Coater Systems
This vacuum evaporator with its suitable dimensions is capable of reaching the desired pressure in a short time and coating process can take place within a few minutes. It is suitable for research, laboratory and electron microscopy applications.
Send your
Contact us today and our friendly support team will reach out as soon as possible.
Revolutionary desktop coater with adjustable thickness, speed control, touchscreen, and user-friendly. For a professional-grade finish on various materials. Ideal for beginners and veterans. Invest for an affordable printing solution.
Call Us Now
Available 24/7 for quick and friendly assistance. Your satisfaction is our top priority.
616-550-2556