Sputter Coater Systems
This high vacuum SEM coater offers high quality uniform films with fine grain sizes which are suitable for specimens that require high resolution and high quality characterization such as FE-SEM, EDS/WDS, TEM, and EBSD. The DSCT with a 2” magnetron cathode, 80 W switching DC power supply and high current power supply for carbon evaporation, could be used for research and different thin film applications.
Pulsed Carbon Fiber Evaporation The small chamber of DSCT is able to perform pulsed carbon fiber evaporation. Short pulses provide more controlled deposition and significantly reduces the amount of debris associated with traditional carbon deposition.
Sample Stages The DCT can be equipped with different sample stage configurations depending on the user requirements. The sample stages are rotatable with adjustable height that can be changed easily. The rotary planetary sample stage is a good choice for uniform coating of porous specimens.
DCR is a rotary-pumped carbon coater that is suitable for SEM sample preparation, EDS/WDS and thin film applications.
DCT is a turbo-pumped carbon coater that is ideal for FE-SEM, EDS/WDS, TEM, EBSD and thin film applications.
This high vacuum coater offers high quality uniform carbon films with fine grain sizes which are suitable for specimens that require high resolution and high quality characterization. Available in Carbon Fibre and/or Carbon Rod
Sputter Coater Systems
High vacuum level with built-in turbomolecular pump 90 L/S (Leybold)
Two stage rotary vane
Backing pump (Diaphragm and scroll pump)
Full range vacuum gauge
DC power supply 80 W
Quartz crystal thickness monitor with precision of 1nm and resolution of 1 Å
One 2-inch magnetron cathode
Electronic gas valves
Sample rotation, height and tilt adjustable
Planetary rotating sample holder
Equipped with electronic shutter
Easy-to-change specimen stages (rotation stage as standard)
Two-year warranty
CE standard conformity
Element Pi products are covered worldwide by both public and product Liability Insurance in case any property damage or personal injury happens caused by the Vac Coat systems.
Intuitive touch screen to control the coating process and rapid data input
User friendly software, updatable via network
Controls coating rate to achieve finer grain structures
Semi-Fully automatic coating process (optional)
Repeatable, programmable sputtering process in the automatic mode
Manual or automatic Timed and Thickness deposition
Able to record and plot coating parameters graphs
Storing coating recipes for repeatable depositions
Fine grain structural deposition for SEM & FE-SEM sample preparation
Nano & microelectronic
Solar cell applications
Optical components coating
Thin film sensors
The DST1-170 has the following options and accessories:
Quartz crystal sensor
Planetary sample rotation stage
Spare glass chamber
Sputtering Targets
Plasma cleaner
Sealing gaskets
Ultimate Vacuum: Less than 8 x10-6 Torr
Suitable for deposition of oxidizing and non-oxidizing materials
Controls the rate of sputtering to achieve finer grain structure
Automatic control of power of the deposition power independent of pressure
Automatic control of the cathode’s temperature to protect the lifetime of the magnets
Rapid data input through fully automatic touch screen panel
Electronic leak valve for Argon gas
Records and plots coating parameter graphs
Transfers curves and deposition process data by USB port to PC
Utilities: 220V-110V, 50/60HZ, 1.5 kW
Shipping weight: 36kg
The DST1-170 is equipped with a 7” colored touch screen and full automatic control using a user-friendly software to control and adjust the deposition process data. The vacuum and coating sequence information can be observed as digital data or curves on the touch screen. The last 300 coatings information is saved on the history page.
The DST1 can be equipped with different sample stage configurations depending on the user requirements. The standard sample stage is rotatable with adjustable height and angle and can be changed easily. The rotary planetary sample stage is a good choice for uniform coating of porous specimens (optional).
The vacuum chamber is Cylindrical Pyrex. The DST1-170 is fitted with an internally mounted 90 L/s turbomolecular pump, backed by a 6m3/h two stage rotary vane pump. It introduces clean vacuum without oil contamination which normally exists with ordinary diffusion pump.
Desktop SEM/TEM Sputter Coater
Sample preparation using sputter coating is the recognized method for non-conductive and low conductive specimens or samples.
Send your
Contact us today and our friendly support team will reach out as soon as possible.
Revolutionary desktop coater with adjustable thickness, speed control, touchscreen, and user-friendly. For a professional-grade finish on various materials. Ideal for beginners and veterans. Invest for an affordable printing solution.
Call Us Now
Available 24/7 for quick and friendly assistance. Your satisfaction is our top priority.
616-550-2556